Skip to main content

Exterior Painting Preparation Tips

Exterior painting preparation tips

Exterior painting is just as significant as interior painting because that’s your presentation card to the outside world and, obviously, your neighbors. Exterior painting has different preparation depending on the type of surfaces you may have, such as concrete, brick, wood, or vinyl. Continue reading to know more about home painting and where to find exterior painters.

Exterior Painting Tips

Before preparing your painting for the determined surface, you must do the groundwork first. For example:

Types Of Surfaces

Concrete

The first step you must follow is to wash the concrete to remove any previous old paint – wash with warm water and soap. Then, to begin painting, patch the concrete for any cracks or else you might find.

Keep in mind that you need 2 to 3 days in a row to paint, and the pain takes about 24 hours to dry in concrete. So you must check your weather.

Lastly, buy Masonry paint – elastomeric paint recommended and a high capacity roller because the paint you’ll be applying is not thin like regular paint.

Brick

When painting brick, there’s not much to do due to the surface. The first step you ought to follow in preparing the bricks. Ensure you clean them thoroughly by using soapy water and a wire brush to remove all the dirt.

The second step you must follow to paint the bricks properly is to apply latex to repair and fix the bricks that have been damaged—lastly, the kind of paint. You should consider using Masonry paint, commonly known as elastomeric paint.

Make sure you paint the tiny cracks to ensure proper adhesion of the paint. Finally, you could add a second coat of paint – it’s optional, though.

Wood

Painting wood is no easy process. The first step is always to clean your wood and sand in all areas. You have to make sure you fully clean and make your wood smooth for painting. You’ll be able to remove any light scratches your wood may have to help the paint adhere to the wood longer.

Later on, you must apply primer. Mix your primer and paint two or three times if necessary. You will get a chalky feel, but that’s normal and goes away after some time. Finally, paint your wood. However, you need to paint with a roller.

Because wood is complicated, you must add the first and second coat of paint. The first coat of paint removes inconsistencies and bumps. The second coat of paint simply adheres to the wood. Moreover, try to let the paint try. After a day, the paint will dry. When it comes to wood, the paint lasts longer once fully cured.

Vinyl

Vinyl is perhaps the most complicated surface where you can paint due to its texture being slick and non-porous. Suppose vinyl is appropriately prepared by deep cleaning with a sponge and phosphate. In that case, it will be a bit easier for the paint to adhere. Remember, although vinyl is complex and paint doesn’t adhere fast, don’t leave any residue.

To conclude, make sure you scour its surface. That way, the paint will adhere. Then, add primer to the vinyl. Using primer ensures the paint will work and remain once applied since its surface is slick. Then, the vinyl is ready to be painted. You don’t need more than one coat of paint, and approximately it’ll take an entire day to dry.

Please keep in mind that it is hard to paint vinyl, so it’s always recommended to contact exterior painters to ensure a faster and proper painting job.

Exterior Painters For Hire

When it comes to exterior painting or any home painting, finding the right exterior painters is difficult. Although DIYs are fun, certain surfaces need a specific type of paint, and that paint needs specialized preparation. It’s best if you hire professionals to tackle down your home painting. If you want to find reliable and experienced exterior painters, click here.

Contact Us Today

If you are looking for a Las Cruces Stucco Repair or a Las Cruces Painting Contractor, please call us today at 575-642-5481, or complete our online request form.